Contact Us

WALAKut-Soft 12"

Write a Review
Price: $3.00 - $250.00
  • Matte finish
  • Can layer
  • 50 microns thick
  • Polyurethane film for garment decorating
  • Very thin material for a soft finished feel and wear
  • Material penetrates into the garment fibers
  • Very elastic and easy to apply
  • Designed for stretchable products
  • Non- sticky liner
  • NOT intended for fine detailed designs
  • Not for nylon, treated or dye sublimated fabrics
  • Due to the manufacturing process, material may vary in width by 1/8-1/4"

For your garment needs, we recommend Heat Transfer Clothing

 

12" pricing:
1 yd roll = $7.00 
5 yd roll = $32.50
10 yd roll = $60.00 
25 yd roll = $135.00             
50 yd roll = $250.00
12" x 12" Sheet = $3.00

12"x12" Sheet Pricing: 
1-4 sheets = $3.00/per sheet
5-14 sheets = $2.75/per sheet
15-74 sheets = $2.65/per sheet
75-149 sheets = $2.45/per sheet
150+ sheets = $2.25/per sheet

  • FARGO ONLY product; will make your entire order ship from our Fargo, ND location.
  • 310°F
  • 15 seconds
  • Peel Cold
  • Medium, even pressure
  • Cut in mirror image
  • Cotton, 100% uncoated polyester, cotton/poly blends, and lycra.
  • Turn garment inside out. Wash and dry on cold.

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

 Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

WALAKut- Soft

WALAKut- Soft

Cut & Apply WALAKut- Soft Using a Silhouette Cameo & Heat Press

Cut & Apply WALAKut- Soft Using a Silhouette Cameo & Heat Press
  • FARGO PRODUCT; will make your entire order ship from our Fargo location.