White 100% polyester garments, Dye sublimated ready dishware (mugs, plates, etc.), or Dye Sub Blanks
Masking, Cutting, and Weeding Instructions
Masking:
Lay the WALASub Pattern Sheet with printed side facing down-the white side of the paper should be facing up
Take a sheet of the mask and remove the protective backing from the mask
Place the mask on top of the white side of the WALASub sheet
Squeegee the mask to the paper to ensure there are no bubbles and that the mask covers all the area of the sheet
Cutting:
Place the sheet on your cutter with the design/pattern side facing up
Cut in mirrored image
Cut Settings for Graphtec:
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard) Siser EasyWeed 15" PDF Instructions Siser EasyWeed Pantone Color Chart
Weeding:
Weed away the excess paper from the mask exposing the image or design you would like to press
Pricing: Pack of 2 with Mask = $7.00 Pack of 4 with Mask = $12.00