null
Contact Us

WALAKut-Express 12" Sheets

Write a Review
Price: $3.00

WALAKut-Express is a thin, elastic, soft to the hand vinyl that blends well into the textiles. Low-temperature application prevents undesirable effects such as glossiness and fiber damage!

  • 90 micron thick
  • Matte finish
  • Layerable
  • Has a sticky liner
  • Due to the manufacturing process, material may vary in width by 1/8-1/4"
  • Can be applied at a low temperature if needed
  • REACH compliant
  • Certified Öko-Tex® Standard 100 Class I
  • WALAKut Express

For your garment needs, we recommend Heat Transfer Clothing

 

Pricing: 
1-4 sheets = $3.00/per sheet
5-14 sheets = $2.75/per sheet
15-74 sheets = $2.65/per sheet
75-149 sheets = $2.45/per sheet
150+ sheets = $2.25/per sheet

  • 250° F-302° F for multi-layering or thick cotton
  • 5 seconds
  • Warm or Cold
  • High, even pressure
  • Cut in reverse
  • 100% Cotton, 100% Polyester, Elastan, or blends of these textiles.
  • Wait 24 hours before first wash. Warm to cold water and tumble dry. Do NOT use bleach. Do NOT dry clean.

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

Customers Also Bought