WALAKut Silicone Dimensional HTV offers a rubber-like texture. Its 250-micron thickness adds a raised, durable finish. This material is perfect for adding unique dimension to your designs. Ideal for polyester, cotton, and poly/cotton blends.
Press at 285°F for 10-15 seconds with medium pressure. Always cover with a silicone sheet during pressing to prevent over-pressing. Peel cold for the best results. Wash inside-out with mild detergent after 24 hours for lasting effect.
- 285° F
- MUST BE COVERED WITH A COVER SHEET WHILE PRESSING, DO NOT OVER PRESS 10 - 15 seconds
- Peel cold
- Medium pressure
- Cut in reverse
- Polyester, cotton, poly/cotton blends
- Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener.
Additional Instructions
Additional Instructions Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment. Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard) Siser EasyWeed 15" PDF Instructions Siser EasyWeed Pantone Color Chart
