Contact Us

WALAKut-Puff 20"

(1) Write a Review
Sku: WK-PUFF0120-5
Price: $58.00

WALAKut Puff adds that dimension and 3D look you are desiring! WALAKut Puff HTV expands under the heat press and turns your garments from a flat look to an extra pop dimensional look. It goes from 60 microns thick before applying with a heat press to 500 microns thick once pressed!

  • White color only
  • Waterbased PU
  • 3D look
  • 20 inch width
  • 60 microns (before heat transfer) 500 microns (after heat transfer)
  • Stretching of garments is NOT recommended as it may disrupt the bond of the garment
 

20" Pricing
1 yd roll = $14.00
5 yd roll = $58.00
10 yd roll = $108.00
50 yd roll = $510.00
12" x 20" Sheet = $6.00

  • FARGO ONLY product; will make your entire order ship from our Fargo, ND location.
  • 330° F
  • 17 - 20 seconds
  • Peel Hot
  • Medium, even pressure
  • Cut in reverse
  • Polyester, cotton, poly/cotton blends
  • Wait 24 hours before washing. Wash inside-out. Tumble dry low. No dry cleaning or bleach.

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

  • FARGO PRODUCT; will make your entire order ship from our Fargo location.

Customers Also Bought

1 Review Write a Review

  • PUFF VINYL WUTTTTT

    stephen croteau

    4

    better then all that other ish on the market trust me