• Step 1: Use SiserPSV Application Tape Cut right reading Adheres to hard surfaces
• Step 2: Cut image in right reading
• Step 3: Weed material
• Step 4: Squeegee transfer mask over image
• Step 5: Remove the white backing (images will stick to the transfer mask)
• Step 6: Squeegee images onto surface
• Step 7: Remove transfer mask

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16 *HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 1

Speed: 3

Force: 4

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Vinyl

Pressure: Default

Blade: Fine-Point Blade (Standard)