This single-sided coated film provides better printer roller traction with minimal static allowing for a great printed image without background artifacts
Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
Apply hot melt powder evenly and remove the excess powder. Use aSeismo DTF Powder Shaker to apply powder with ease!
Hover with aheat pressto bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315°F, 1min).
Transfer the image by heat press at 330°F for 15sec with medium pressure.
After the first press, Option 1: Wait for 4-6 seconds and remove the film gently Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.
