Contact Us

3M® Scotchlite Reflective 20"


Price:
$23.00 - $530.00

Personal Financing Options:

Affirm

As low as $/mo.
Learn more

Order must be at least $250.00 Learn more

Afterpay

4 interest free payments of $. Learn More

Order must be less than $2000. Learn More

Business Financing:

Quickspark

As low as $/mo.
Learn More





3M® Scotchlite Reflective 20" HTV

3M® Scotchlite Reflective heat transfer vinyl is a high visibility and reflective material that you want to use on your next project. This reflective HTV is used for EMT, Police, Security and Fire Rescue garments with a white reflective. 3M® Scotchlite Reflective has embedded glass beads that allows it to reflect when light hits it.

  • 20" width
  • 160 Microns thick
  • Silver reflective materials with embedded glass beads
  • High visibility in daytime and nighttime
  • Reflects white
  • Used for EMT, Police, Security and Fire rescue garments
  • 3M® Scotchlite Reflective material
  • Cannot layer
  • Accessories  
  • Certificate ANSI
  • Certificate of Test
  • 3M 4781 Reflex Silver (160 microns thick) – Cotton, Polyester, Cotton/Poly, most synthetics (acrylics)
  • Heat Transfer Equipment

 

 

20" Pricing:

3 foot roll = $23.00
5 yd roll = $108.00
10 yd roll = $205.00
27 yd roll = $530.00

  • 325-350° F
  • 10-20 seconds
  • Peel Hot
  • Medium even pressure
  • Cut in reverse
  • 100% Cotton, 100% Polyester, 100% Preshrunk cotton, Cordura, Cotton/Poly Blends, Lycra/Spandex Blends, Nylon
  • Wait 24 hours before first wash. Machine wash inside out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 30 cm/s

3. Acceleration: 4

4. Cut Force: 12-14

*Heat Transfer Warehouse uses a 45 Degree Blade




Customers Also Bought