Contact Us

DecoSPARKLE Holographic

(13 reviews)
Price: $8.50
  • Holographic film 
  • Creates stunning reflective rainbow effects
  • Used for faux rhinestones
  • Adds prism-like effect to any garment
  • Great for dance and cheer wear
  • Approximately 110 Microns/4.3 Mils thick
  • Will not stretch or layer
  • Composition PVC
  • Due to the manufacturing process, material may vary in width by 1/8-1/4
  • Accessories 
  • (*)material has manufacturing line every 18-24 inches

For your garment needs, we recommend Heat Transfer Clothing

19" Pricing:   
1 yd roll = $8.50
5 yd roll = $35.00
10 yd roll = $68.00
25 yd roll = $157.50
12" x 19" sheet = $3.50

12"x19" Sheet Pricing: Discounts are per color
1-4 sheets = $3.50/per sheet
5-14 sheets = $3.10/per sheet
15-74 sheets = $2.70/per sheet
75+ sheets = $2.30/per sheet
 

  • 305-320°F
  • 15-18 seconds
  • Peel cold
  • Medium/firm, even pressure
  • Cut in reverse
  • Adheres to most fabrics, NO nylon, will NOT stretch or layer
  • Wash inside out, cold, gentle cycle, tumble dry low heat

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 25

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 14

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Light Cardstock 

Pressure: Default

Blade: Fine-Point Blade (Standard)

DecoSPARKLE

DecoSPARKLE

13 Reviews

  • DecoSPARKLE Holographic

    Melissa

    5

    Beautiful holographic vinyl. Easy to weed. Just be careful when pressing as the carrier sheet is not sticky.

  • DecoSPARKLE Holographic

    Melissa

    5

    Beautiful holographic vinyl. Easy to weed. Just be careful when pressing as the carrier sheet is not sticky.

  • DecoSPARKLE Holographic

    Melissa

    5

    Beautiful holographic vinyl. Easy to weed. Just be careful when pressing as the carrier sheet is not sticky.

  • DecoSPARKLE Holographic

    Melissa

    5

    Beautiful holographic vinyl. Easy to weed. Just be careful when pressing as the carrier sheet is not sticky.

  • DecoSPARKLE Holographic

    Melissa

    5

    Beautiful holographic vinyl. Easy to weed. Just be careful when pressing as the carrier sheet is not sticky.

  • DecoSPARKLE Holographic

    Melissa

    5

    Beautiful holographic vinyl. Easy to weed. Just be careful when pressing as the carrier sheet is not sticky.

  • DecoSPARKLE Holographic

    Guest

    5

    Beautiful holographic vinyl. Easy to weed. Just be careful when pressing as the carrier sheet is not sticky.

  • DecoSPARKLE Holographic

    Guest

    5

    This a very beautiful product. I am obsessed with all the Holographic. It cuts easy, & is heat pressed on easy. I can't say enough abut this.

  • DecoSPARKLE Holographic

    Guest

    2

    This is NOT for the faint of heart. If you can get it to weed properly and transfer right, it is gorgeous. I however, was not successful. Really bummed because I tried several times, making adjustments after checking and re-checking settings, instructions, and demos and just couldn't get it. Had lots of holo left on the carrier sheet but it didn't transfer since there was no adhesive and then once I pressed it, had holo peel off leaving only adhesive in the middle of letters and images. Tried 3 times and I don't know if it was user error or just a bummer session but.... be sure you know what you're doing before you use this. I had the navy.