Every heat transfer material is a little different in regards to pressing time, temperature, pressure, and peel! On this page we list all the information you will need to correctly apply your heat transfer materials. ★☆☆ = Difficult, ★★☆ = Intermediate, ★★★ = Easy
Heat Transfer Vinyl
PRODUCT | TEMP | TIME | PRESSURE | PEEL | LAYERABLE | FABRICS | FINISH | USABILITY |
Siser EasyWeed | 305 F | 10-15 seconds | Medium pressure | Hot or Cold | Yes | Polyester, cotton, poly/cotton blends | Semi-gloss | ★★★ |
Siser Twinkle | 305 F | 15 seconds | Medium pressure | Warm | Yes | Cotton, polyester, elastan, or blends of these textiles | Smooth glitter | ★★☆ |
Siser EasyWeed Stretch | 320 F | Pre-press 2 seconds, then 20 seconds | High pressure | Hot or Cold | Yes | 100% uncoated polyester, poly/cotton blends, cotton, lycra, wool, linen | Matte | ★★★ |
Siser Glitter | 320 F | 15 seconds | Medium to high pressure | Warm | Top layer only | Cotton, polyester, fabric blends, spandex, lycra, wool, linen | Textured glitter | ★★☆ |
Siser EasyWeed Fluorescent | 305 F | 10-15 seconds | Light pressure | Hot | Yes | Polyester, cotton, poly/cotton blends | Semi-gloss | ★★★ |
Siser Holographic | 320 F | 15-20 seconds | Medium pressure | Cold | Top layer only | Cotton, polyester, cotton/poly blends, leather | Glossy | ★★☆ |
Siser Brick 600 | 310 F | 20 seconds | Medium pressure | Cold | Top layer only | 100% cotton, poly/cotton blends, 100% uncoated polyester, Lycra/spandex | Matte | ★☆☆ |
Siser EasyWeed Electric | 305 F | Preheat for 2-3 seconds then 15 seconds | Medium, even pressure | Hot or Cold | Yes | 100% cotton, Poly/cotton blends, 100% polyester, Leather | Glossy | ★★★ |
Siser Stripflock Pro | 311 F | 10-15 seconds, 10 second re-press if design lifts | Medium pressure | Warm | Yes | Cotton, polyester, poly/cotton blends, leather | Suede texture | ★★☆ |
Siser EasyWeed Glow in the Dark | 305 F | Pre-press 2 seconds, then 10-15 seconds | Medium/firm pressure | Hot or Cold | Yes | 100% uncoated polyester, cotton, poly/cotton blends | White in the light, semi-gloss | ★★★ |
Siser EasyPatterns | 305 F | Pre-press 2-3 seconds, then 10-15 seconds | Medium pressure | Hot or Cold | No | 100% cotton, Poly/Cotton blend, 100% Polyester, Leather, Lycra/spandex | Semi-gloss | ★★☆ |
Siser Sparkle | 311 F | 15 seconds | Medium pressure | Warm | Yes | Cotton, polyester, poly/cotton blends, elastic fabrics, spandex | Smooth glitter | ★★★ |
Siser EasyPatterns Plus | 305 F | Pre-press 2-3 seconds, then 10-15 seconds | Medium pressure | Hot or Cold | No | 100% cotton, Poly/Cotton blend, 100% Polyester, Leather, Lycra/spandex | Semi-gloss | ★★☆ |
Siser Neon Glitter | 330 F | 15 seconds | Medium to firm pressure | Hot or Cold | Top layer only | Cotton, polyester, fabric blends, spandex, lycra, wool, linen | Textured glitter | ★★☆ |
Siser Metal | 305 F | 10-15 seconds | Medium pressure | Cold | No | Cotton, polyester, poly/cotton blends, leather, sublimated polyester | Smooth metallic | ★★☆ |
Siser Easy Reflective | 305 F | Preheat for 2-3 seconds then 15 seconds | Medium/firm pressure | Warm | No | 100% Cotton, 100% Polyester, Poly/cotton blends, and test for Nylon | Glossy | ★★☆ |
Siser EasyWeed Sub Block | 265 F | 10-15 seconds | Medium to firm pressure | Hot or Cold | Bottom layer only | 100% cotton, Poly/cotton blends, 100% polyester | Matte | ★★★ |
Siser EasyWeed Extra (Nylon) | 305 F | 10-15 seconds | Medium pressure | Hot or Cold | Yes | Polyester, cotton, poly/cotton blends, nylon | Semi-gloss | ★★★ |
Siser CADflex | 305 F | Preheat for 2-3 seconds then 15 seconds | Medium to firm pressure | Cold | No | 100% cotton, Poly/cotton blends, 100% polyester, Leather | Semi-gloss | ★★☆ |
Siser Blackboard | 275 F | 15 seconds | Medium pressure | Warm or Cold | Yes | 100% Cotton, 100% Polyester, Poly/Cotton blends | Matte | ★★☆ |
Siser Puff | 280 F | 8-10 seconds | Firm, even pressure | Hot | Top layer only | 100% Cotton, 100% Polyester, Cotton/Poly Blends | Raised puff | ★★☆ |
PRODUCT | TEMP | TIME | PRESSURE | PEEL | LAYERABLE | FABRICS | FINISH | USABILITY |
ThermoFlex Plus | 330 F | 15 seconds | Medium to high pressure | Warm or Cold | Yes | Cotton, linen, wool, lycra, spandex, polyester blends | Matte | ★★★ |
ThermoFlex Turbo Low Temp | 265 F 300 F poly/acrylic, nylon | 5 seconds | Medium pressure | Warm | Yes | Cotton, polyester, poly/cotton blends, leather, sublimated polyester | Smooth metallic | ★★★ |
Frosty Clear | 320 F | 5 seconds | Medium/firm pressure | Cold then cover with a Teflon sheet and repress for 5 seconds | Top layer only | Cotton, linen, wool, lycra, spandex, polyester blends. NO nylon/ NO mesh | Matte | ★☆☆ |
Turbo Low Temp Metallics | 265-320 F | 3-5 seconds | Medium pressure | Warm | Yes | Cotton, polyester, blends, nylon, acrylics, spandex, lycra, vinyl, and leather | Matte | ★★★ |
ThermoFlex Plus Metallics | 330 F | 15 seconds | Medium pressure | Warm or Cold | Yes | Cotton, linen, wool, lyrca, polyester blends, and spandex | Matte | ★★★ |
ThermoFlex Stretch |
330 F | 15 seconds | Medium/firm pressure | Warm or Cold | Yes | Cotton, linen, wool, lycra, spandex, polyester blends | Glossy | ★★★ |
ThermoFlex Neons | 330 F | 15 seconds | Medium/firm pressure | Warm or Cold | No | Cotton, linen, wool, lycra, spandex, polyester blends | Semi-gloss | ★★★ |
ThermoFlex Glossy | 330 F | 15 seconds | Medium/firm pressure | Warm or Cold | No | Cotton, linen, wool, lycra, polyester blends & spandex | Glossy | ★★★ |
ThermoFlex Light | 315-320 F | 15 seconds | Medium pressure | Warm | Yes | Cotton, Uncoated Polyester, Fabric Blends, Spandex, Lycra, Wool, Linen | Glossy | ★★☆ |
ThermoFlex Fashion Patterns | 305 F | 8-10 seconds | Medium pressure | Warm | Top layer only | Cotton, Uncoated Polyester, Acrylic, and similar fabrics | Semi-gloss | ★★☆ |
Turbo Reflective | 265 F | 5 seconds | Medium pressure | Warm | No | Polyester, cotton, poly/cotton blends, uncoated nylon, polyester/acrylic | Reflective | ★★☆ |
ThermoFlex Xtra (Nylon) | 300-305 F | 5 seconds. Peel then cover with Teflon and repress 10 seconds | Medium pressure | Cold | No | Nylon, Leather, Polyester and Heat Sensitive Fabrics | Matte | ★★★ |
PRODUCT | TEMP | TIME | PRESSURE | PEEL | LAYERABLE | FABRICS | FINISH | USABILITY |
WALAKut Express | 250-302 F | 5 seconds | High pressure | Warm or Cold | Yes | Cotton, polyester, elastan, or blends of these textiles | Matte | ★★★ |
WALAkut Puff | 320 F | 15 seconds | Medium pressure | Warm | Top layer only | Cotton, uncoated, polyester, fabric blends, poly/acrylic | Textured puff | ★★☆ |
WALAKut Glow Puff | 280 F | 8-10 seconds | Firm pressure | Hot | Top layer only | 100% Cotton, 100% Polyester, Cotton/Poly Blends | Textured puff | ★★☆ |
WALAKut Puff Neons | 275 F | 10 seconds | Medium pressure | Hot | Top layer only | Cotton, Uncoated Polyester, Fabric Blends, Polyester/Acrylic, | Textured puff | ★★☆ |
WALAKut Puff Plus | 285 F | 10-12 seconds | Medium/firm pressure | Warm or Cold | Top layer only | Polyester, cotton, poly/cotton blends | Textured puff | ★★☆ |
WALAKut Soft | 310 F | 15 seconds | Medium pressure | Cold | Yes | Cotton, 100% uncoated polyester, cotton/poly blends, and lycra | Matte | ★★☆ |
WALAKut Express Neon | 250-302 F for multi-layering or thick cotton | 5 seconds | High pressure | Warm or Cold | Yes | 100% Cotton, 100% Polyester, Elastan, or blends of these textiles | Matte | ★★★ |
WALAKut Metallics | 270° F Cotton, Poly, Cotton/Poly Blend 300° F Nylon | 5 seconds - Nylon: Pre press 5 seconds then press 5 seconds | Medium/firm pressure | Warm | No | Cotton, linen, wool, lycra, spandex, polyester blends. NO nylon/ NO mesh | Metallic/pearl | ★★★ |
WALAKut Glossy Clear Dye Sub | 310-330 F | 5 seconds | Firm pressure | Cold | No | Cotton, polyester, fabric blends, lycra, wool, linen | Glossy | ★★☆ |
WALAKut Silicone |
285 F | 10-15 seconds must cover | Medium pressure | Cold | Yes | Cotton, polyester, poly/cotton blends, leather | Suede texture | ★★☆ |
WALAKut Soft Metal Silver Tiger | 302-320 F | 7-8 seconds | Medium pressure | Warm | Yes | Cotton, Uncoated Polyester, Fabric Blends, Poly/Acrylic | Smooth metallic | ★★★ |
WALAKut Patterns Fashion | 300 F | 10 seconds | Medium pressure | Hot | Top layer only | Adheres to most fabrics | Glossy | ★★☆ |
PRODUCT | TEMP | TIME | PRESSURE | PEEL | LAYERABLE | FABRICS | FINISH | USABILITY |
Dimension | 320 F | 25 seconds | Medium pressure | Cold | Yes | Cotton, Uncoated Polyester, Cotton/Poly Blends, and Polyester/Acrylic | Matte | ★☆☆ |
Dimension 2 | 300 F | 5 seconds | Medium pressure | Peel Warm, then turn garment inside-out and re-press for 20 seconds | No | Cotton, Uncoated Polyester, Cotton/Poly blends, Polyester/Acrylic, No Nylon | Matte | ★☆☆ |
GlitterFlex Ultra and Premium Colors | 320-330 F | 12-15 seconds | Medium pressure | Warm | Top layer only | Cotton, Uncoated Polyester, 50/50 Blends, Fabric Blends, Wool, Linen | Glitter | ★★☆ |
Subliblock Turbo | 266 F | 5 seconds | Medium pressure | Warm | No | Cotton, cotton/poly blend, polyester blends, poly/acrylic blend | Matte | ★★☆ |
GlitterFlex Ultra Opaque Neons | 320-330 F | 12-15 seconds | Medium pressure | Warm | Top layer only | Cotton, Uncoated Polyester, 50/50 Blends, Fabric Blends, Wool, Linen | Glitter | ★★☆ |
GlitterFlex Light | 320-330 F | 12-15 seconds | Medium pressure | Warm | Top layer only | Cotton, Uncoated Polyester, 50/50 Blends, Fabric Blends, Wool, Linen | Glitter | ★★☆ |
GlitterFlex 2 | 330-335 F | 3 seconds | Medium pressure | Warm, cover with teflon sheet, repress for 10 seconds | Top layer only | Cotton, uncoated polyester, fabric blends, spandex, lycra, wool, linen | Glitter | ★★☆ |
DecoFilm Soft Metallics | 302-320 F | 7-8 seconds | Medium pressure | Cold | Top layer only | Cotton uncoated polyester, fabric blends, poly/acrylic | Smooth, soft metallic | ★★★ |
DecoFilm Brilliants | 310-330 F | 10-15 seconds | Firm pressure | Cold | No | Adheres to most fabrics no nylon | Metallic chrome finish | ★★☆ |
DecoFilm Gloss | 284 F | 8 seconds | Medium pressure | Warm | Yes | Cotton, Uncoated Polyester, Fabric Blends, and similar fabrics | Glossy | ★★☆ |
DecoFilm Soft Metallics Patterns | 302-320 F | 7-8 seconds | Medium pressure | Cold | No | Cotton, Uncoated Polyester, Fabric Blends, Poly/Acrylic | Smooth, soft metallic | ★★★ |
Embossed DecoFilm | 310-330 F | 10-15 seconds | Extra Firm pressure | Cold, cover with teflon sheet, repress for 5 seconds | No | Cotton, uncoated Polyester, Fabric Blends, Wool | Chrome | ★★☆ |
DecoFilm Soft Metallics Colors | 302-320 F | 7-8 seconds | Medium pressure | Cold, cover with teflon sheet, repress for 3-5 seconds | Top layer only | Cotton, Uncoated Polyester, Fabric Blends, Poly/Acrylic | Smooth metallic | ★★★ |
DecoFilm Metal Stretch | 310-330 F | 15 seconds | Medium pressure | Cool, cover and reheat if necessary | No | Adheres to most fabrics no nylon | Smooth metallic | ★★☆ |
FashionFlex Light Color Changing | 300 F | 8-12 seconds | Medium pressure | Warm | No | Cotton, Uncoated Polyester, and Fabric Blends | Matte | ★★★ |
Metal Flake | 330 F | 17-20 seconds | Firm pressure | Warm or Cold | Top layer only | Cotton, linen, wool, lycra, polyester blends & spandex | Smooth glitter | ★★☆ |
EconomyFlex | 330 F | 10-15 seconds | Medium pressure | Warm or Cold | No | Cotton, polyester, polyester mesh and polyester jerseys. No Nylon | Matte | ★★☆ |
PearlFlex | 300 F | 8-10 seconds | Medium pressure | Cool | No | Cotton, Uncoated Polyester, Fabric Blends, Polyester/Acrylic | Glitter | ★★☆ |
DecoFilm Brilliant Chameleon | 300-320 F | 10-15 seconds | Medium pressure | Warm | No | Cotton, uncoated polyester, fabric blends, wool, linen | Smooth and shiny | ★★☆ |
Reflection Protection 9505 | 250-275 F | Pre press for 5 seconds, then press 3-5 seconds | Firm pressure | peel when cool and re-press with Teflon cover sheet for 5-10 seconds | No | Cotton and cotton blends | Reflective | ★★☆ |
Textured Carbon Fiber | 325 F | 15 seconds | Medium pressure | Cold | No | Cotton, uncoated polyester, fabric blends, lycra, wool, and linen | Carbon fiber | ★★☆ |
DecoFlock Premium Plus | 320 F | 15 seconds | Medium pressure | Warm | No | Cotton, Uncoated Polyester, Acrylic, Fabric Blends | Plush velvet flock | ★★☆ |
PRODUCT | TEMP | TIME | PRESSURE | PEEL | LAYERABLE | FABRICS | FINISH | USABILITY |
Hotmark Revolution Low Temp | 245-285 F | 20-25 seconds | Medium pressure | Hot or Cold | Yes | Cotton, polyester, nylon, acrylic | Matte | ★★★ |
Galaxy Stretchable Glitter | 300-320 F | 15-20 seconds | Medium pressure | Cold | No | Cotton, polyester, acrylic, and similar fabrics | Glitter | ★★☆ |
Chemica Fashions | 300-320 F | 15-20 seconds | Medium pressure | Cold | Yes | Cotton, polyester, acrylic, and similar fabrics | Matte | ★★★ |
ThermoBanner2 - Sunmark | 210-285 F | 10-15 seconds | Very light pressure | Cold | Yes | Coated canvas, most vinyls and plastic coated surfaces | Semi-gloss | ★★☆ |
Chemica UpperFlok | 320 F | 10-15 seconds | Very light pressure | Cold | Yes | Coated canvas, most vinyls and plastic coated surfaces | Velvet | ★★☆ |
Chemica Stretchable Metallics | 290 F | 15 seconds | Medium pressure | Warm or Cold | No | Adheres to most fabrics, except nylon | Metallic | ★★☆ |
Foils
PRODUCT | TEMP | TIME | PRESSURE | PEEL | LAYERABLE | FABRICS | FINISH | USABILITY |
HotMelt (Foil Receiving Film) | 300 F | 5 seconds | Medium pressure | Hot | Yes | 100% polyester, 100% cotton and all poly/cotton blends | Clear | ★★☆ |
Heat Transfer Foils | 275-330 F | 8-15 seconds | Firm pressure | Cold | Top layer only | Chrome | ★★☆ |
Printable Heat Transfer Vinyl
PRODUCT | TEMP | TIME | PRESSURE | PEEL | LAYERABLE | FABRICS | FINISH | USABILITY |
Siser ColorPrint Easy | 300 F | 15 seconds | Medium, even pressure | Warm | Top layer only | 100% cotton, 100% uncoated polyester, poly/cotton blends | Semi-gloss | ★★☆ |
Siser ColorPrint PU Matte | 295 F | 15-20 seconds | Medium pressure | Hot | Top layer only | 100% uncoated polyester, 100% cotton and all poly/cotton blends in addition to lycra, spandex and leather | Matte | ★★☆ |
Siser ColorPrint PU Gloss | 295 F | Pre-heat garment, 15-20 seconds to apply | Medium pressure | Hot | Top layer only | 100% uncoated polyester, poly/cotton blends, cotton, lycra, wool, linen | Gloss | ★★☆ |
Siser S-Print | 248 F | 10-15 seconds | Medium pressure | Hot | Top layer only | 100% cotton, 100% polyester, Cotton/Poly Blends, and Spandex | Matte | ★★☆ |
Siser Sublithin/Dye Block | 265 F | Preheat garment 2-3 seconds, press for 15 seconds | Medium to firm, even pressure | Warm | Top layer only | Ideal for polyester garments with dye migration issues | Matte | ★★☆ |
Siser Hi-5 Matte | 250° - 300°F | Preheat garment for 5 seconds; press transfer for 5 seconds | Medium pressure | Hot | Top layer only | Cotton, polyester, cotton/poly blends | Matte | ★★☆ |
Siser ColorPrint Extra PU | 265 F | 15 seconds | Medium even pressure | Warm | Top layer only | Nylon, 100% Cotton, 100% Polyester, Cotton/Poly Blends | Gloss | ★★☆ |
Siser SparklePrint | 311 F | 15 seconds | Medium Firm pressure | Hot | Top layer only | 100% cotton, 100% polyester, Cotton/Poly Blends, and Spandex | Smooth glitter | ★★☆ |
Siser DigiBrick | 311 F | 25 seconds | Medium Firm pressure | Cold | Top layer only | 100% cotton, 100% polyester, and Cotton/Poly Blends | Matte | ★★☆ |
PRODUCT | TEMP | TIME | PRESSURE | PEEL | LAYERABLE | FABRICS | FINISH | USABILITY |
Ultimate Print Soft Matte UPSM-4030 | 330 F | 17-20 seconds | Medium, even pressure | Warm | Top layer only | Cotton, polyester and blends *No nylon | Matte | ★★★ |
Ultimate Print Soft Gloss UPSG-4031 | 330 F | 17-20 seconds | Medium, even pressure | Hot or Cold | Top layer only | Cotton, Polyester and blends. NO Nylon | Gloss | ★★★ |
Ultimate Print Soft Matte UPSM-4032 | 320 F | 17-20 seconds | Medium, even pressure | Warm | Top layer only | Cotton, polyester/cotton blends and polyester/acrylic blends | Matte | ★★★ |
Ultimate Print 4033 SuperSoft Matte | 320 F | 15 seconds | Medium, even pressure | Warm | Top layer only | Cotton, Polyester and blends. NO Nylon | Matte | ★★☆ |
Ultimate Print 4034 Transparent Soft Matte | 320 F | 15 seconds | Medium, even pressure | Hot or Cold | Top layer only | Cotton, Polyester and Blends | Matte | ★★★ |
Ultimate Print Turbo UPT-4036 | 266-320 F | 5-3 Seconds | Medium to high pressure | Warm | Top layer only | Cotton, Polyester, Uncoated Nylon, Mixtures of polyester/cotton and polyester/acrylic | Matte | ★★★ |
Poli-Tape UV Print 4037 | 266-320 F | 5-3 Seconds | Medium, even pressure | Warm | Top layer only | Cotton, Polyester, Uncoated Nylon, Mixtures of polyester/cotton and polyester/acrylic | Semi-gloss | ★★☆ |
ColorPrint Leather CPLV-2700 | 170-200 F | 10-15 seconds, peel, then cover with Transfer Parchment and repress 10 seconds | Firm, even pressure | Warm almost hot | Top layer only | For leather, vinyl and other low temperature substrates | Matte | ★★☆ |
CPS-2168 Solvent Silver Gloss | 275 F | 15-20 seconds | Firm, even pressure | Warm almost hot | Top layer only | Cotton, uncoated polyester, fabric blends, spandex, lycra, wool, linen | Gloss | ★★☆ |
ColorPrint CPS - 2160 | 275 F | 15-25 seconds | Firm, even pressure | Warm almost hot | Top layer only | Cotton and blended fabrics, polyester fabrics, nylon and spandex | Semi-gloss | ★★☆ |
Printable Blockout SPLS-4010-T | 275 F | 17-20 seconds | Medium, even pressure | Cold | Top layer only | Cotton, uncoated polyester, fabric blends and spandex | Matte | ★★☆ |
PRODUCT | TEMP | TIME | PRESSURE | PEEL | LAYERABLE | FABRICS | FINISH | USABILITY |
Hotmark Print 1792 | 320F | 20 seconds | Medium, even pressure | Hot or Cold | Top layer only | Cotton , Polyester, Acrylic and Similar fabrics | Matte | ★★★ |
1722 BestPrint | 320 F | 20 seconds | Medium, even pressure | Hot | Top layer only | Cotton / Polyester / Acrylic & Similar fabrics | Matte | ★★★ |
Subliflok 1602 | 340 F | 50 seconds | Medium, even pressure | Hot | Top layer only | Cotton, polyester, acrylic and similar fabrics | Matte | ★★☆ |
Hotmark RevolutionPrint 1798 | 245-285 F | 5-20 seconds | Medium to firm pressure | Hot | Top layer only | Pressure Print and Cut right reading Cotton, Polyester, Nylon, Acrylic and similar Fabrics | Semi-matte | ★★★ |
1795 Hotmark Print SIR | 320 F | 20 seconds | Medium pressure | Hot | Top layer only | Cotton, Polyester, Acrylic, Softshell and similar fibers | Matte | ★★★ |
BestPrint Nylon 1902 | 280 F | 20 seconds | Medium, even pressure | Warm | Top layer only | Cotton, Polyester, Acrylic and Coated Nylon | Glossy | ★★★ |
Clearprint Matte 1690 | 320 F | 20 seconds | Medium, even pressure | Cold | Top layer only | Light colored fabrics, cotton, polyester, acrylic - similar fibers | Matte | ★★★ |
Rhinestones
PRODUCT | TEMP | TIME | PRESSURE | PEEL | LAYERABLE | FABRICS | FINISH | USABILITY |
WALAStones | 335 F | 15 seconds | Medium to firm pressure | Cold | No | Adheres to 100% polyester, cotton and all poly/cotton blends | Shine | ★★★ |
HotFix RhineStones | 335 F | 15 seconds | Medium to firm pressure | Cold | No | Adheres to 100% polyester, cotton and all poly/cotton blends | Shine | ★★☆ |
Heat Transfer Paper
PRODUCT | TEMP | TIME | PRESSURE | PEEL | LAYERABLE | FABRICS | FINISH | USABILITY |
WALAPaper Inkjet Light Smooth | 350 F | 25-30 seconds | Medium, even pressure | Hot | No | 100% Cotton, 100% Polyester, 50/50 Cotton/Poly blend | Matte | ★★★ |
WALAPaper Inkjet Dark Premium | 350 F for 100%-50% cotton blends 275°F for fabrics less than 50% cotton | 25 seconds | Medium, even pressure | Hot or Cold | No | 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend | Matte | ★★☆ |
Neenah 3G Jet Opaque | 350 F | 30 seconds | Medium to Firm pressure | Cold | No | 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend | Matte | ★★☆ |
Neenah InkJet-Opaque II | 350 F | 30 seconds | Medium, even pressure | Cold | No | 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend | Matte | ★★☆ |
Neenah Inkjet Light Jet-Pro SoftStretch | 375 F | 20-30 seconds stretch garment slightly after peeling | Medium to Firm pressure | Hot | No | White or light colored garments, cotton, polyester, and blends. *No nylon | Matte | ★★★ |
Neenah InkJet-Pro Active Light | 375 F | 20-25 seconds | Firm, even pressure | Hot | No | 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend | Matte | ★★★ |
Neenah Techniprint EZP Laser(Light) | 375 F | Pre-press garment for 5 seconds then press for 20-30 seconds | Medium to Firm pressure | Hot | No | White or light colored garments, cotton, polyester, and blends. *No nylon | Matte | ★★★ |
Forever Flex-Soft (No Cut) | 375 F | 7-8 seconds | Medium pressure | Cold | No | Cotton uncoated polyester, fabric blends, poly/acrylic | Matte | ★★☆ |
Neenah Dark Laser 1 Opaque | 350 F | 30 seconds | Medium, even pressure | Cold | No | 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend | Matte | ★★☆ |
Forever Paper Laser Light Transfer | 356-392 F | 15-30 seconds | Firm pressure | Hot | No | 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend | Matte | ★★☆ |
Forever Paper Laser Dark | 356-392 F | 15-30 seconds | Firm pressure | Hot | No | 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend | Matte | ★★☆ |
Siser EasyColor DTV | 310 F | 15 seconds | Medium pressure | Warm | No | 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend | Matte | ★★☆ |
WALAPaper Laser Light | 380 F | 25 seconds | Medium, even pressure | Hot | No | 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend | Matte | ★★★ |
WALAPaper Laser Dark | 325 F for 100%-50% Cotton, 275 F for fabrics less that 50% cotton | 20 seconds | Medium even pressure | Cold | No | 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend | Matte | ★★☆ |
Custom Transfers
PRODUCT | TEMP | TIME | PRESSURE | PEEL | LAYERABLE | FABRICS | FINISH | USABILITY |
Supacolor Wearables | 290-320 F | 10-15 seconds | High pressure | Peel hot | No | Polyester, cotton, poly/cotton blends | Matte | ★★★ |
Supacolor Sub Blocker | 285-320 F | 10-15 seconds | High pressure | Peel hot | No | Sublimated garments, garments that bleed,not suitable for soft shell | Matte | ★★★ |
Supacolor Soft Shell | 285-320 F | 10 seconds | High pressure | Peel hot | No | Soft shell fabric, less stretch | Matte | ★★★ |
Supacolor Headwear | 285-320 F | 10 seconds | High pressure | Peel hot | No | Caps, bucket hats, will bridge seams | Matte | ★★☆ |
Supacolor Promotional | 250-285 F | 6-10 seconds | High pressure | Peel hot | No | Tote Bags, Nylon Bags, Umbrellas, and Jute Bags | Matte | ★★★ |
Custom Printed Heat Transfers | 266-320 F | 3-10 seconds | Medium, even pressure | Warm | No | Cotton, Polyester, Uncoated Nylon, 50/50 blends | Semi-gloss | ★★★ |
Custom Rhinestones Transfers | 335 F | 10-15 seconds | Medium to Firm pressure | Cold | No | Cotton, polyester and blends *No nylon | Shine | ★★★ |
Custom Dye Sublimation Transfers | 375-400 F | 30-90 seconds | Medium to Firm pressure | Hot | No | White 100% polyester garments, Dye sublimated ready dishware, or Dye Sub Blanks | Matte | ★★★ |
Custom Sticky Dye Sublimation Transfers | 375-400 F | 30-90 seconds | Medium to Firm pressure | Hot | No | White 100% polyester garments or Dye Sub Soft Blanks, Only use with Soft blanks | Matte | ★★★ |
Custom DTF Transfers | 320 F | 14 seconds | Medium pressure | Warm | No | All Garments | Matte | ★★★ |
Custom Decopress Patches Transfers Headwear | 225-265 F | 5-10 seconds | Light to Medium pressure | Peel backing film before pressing | No | Polyester, cotton, poly/cotton blends | Matte | ★★★ |
Custom Decopress Patches Transfers Apparel | 265-295 F | 20-30 seconds | High pressure | Wait 24 hours for bond to be permanent | No | Polyester, cotton, poly/cotton blends, acetates, denim, wool, silk, rayon | Matte | ★★★ |
Custom Decopress Patches Transfers Promo | 320 F | 30 seconds | Light to Medium pressure | Peel backing film before pressing. Set iron to cotton, use cover sheet | No | Polyester, cotton, poly/cotton blends, denim, canvas | Matte | ★★★ |
Custom Decopress Patches Transfers Crafter | 340 F | 15-30 seconds | Medium pressure | Peel backing film before pressing. Set iron to cotton, use cover sheet | No | Polyester, cotton, poly/cotton blends, denim, canvas | Matte | ★★★ |
Hot vs Cold Peel
Hot Peel
Most materials will be a warm or hot peel like Siser Easyweed, ThermoFlex Plus, Siser Easyweed Stretch, Easyweed Fluorescents, Siser Easyweed Glow in the Dark, WALAKut Express, ThermoFlex Turbo Low Temp, and Chemica Hotmark Revolution. Other specialty materials like Siser Glitter, WALAKut Puff, StripFlock Pro, Siser Sparkle, and Siser Twinkle are also a warm peel!
Cold Peel
Some materials require a cold peel. If the vinyl you are using recommends a cold peel, it is important to be very patient and wait until it is not warm at all. If you peel too soon, you may pull up the transfer since the adhesive hasn't finished setting.
Low Temp
Low temp htv is a great option for pressing more heat-sensitive materials. WALAKut Express, Siser Easyweed, Thermoflex Turbo Low Temp, and Chemica Hotmark Revolution are the low temp options available on our website.
Layerable
Some layerable htvs are Siser Easyweed, ThermoFlex Plus, Siser Easyweed Stretch, Easyweed Fluorescents, StripFlock Pro, Siser Easyweed Glow in the Dark, WALAKut Express, Siser Sparkle, ThermoFlex Turbo Low Temp, and Chemica Hotmark Revolution. In the chart when we talk about top layer only, that simply means we don't recommend layering other htv on top of it, but it will be fine on top of other htv.