CUT SHINY SIDE UP

• 275°F
• 10 seconds
• Peel Hot
• Medium, even pressure
• Cut in reverse
• Cotton, Uncoated Polyester, Fabric Blends, Polyester/Acrylic, and Similar Fabrics NO NYLON
• Wash inside-out, cold water, gentle cycle, tumble dry low

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 8 cm/s

3. Acceleration: 4

4. Cut Force: 18

*Heat Transfer Warehouse uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 10

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)