Chemica Fashions

• Pre-printed transfer materials
• Animal and camouflage prints available
• 50-170 microns thick
• Can layer
• Will not adhere to nylon, dazzle or shiny polyester
• Due to the manufacturing process, material may vary in width by 1/8-1/4
• Accessories
• Please note: Due to manufacturer master roll length, some materials may come on two separate cores to get the desired length.

For your garment needs, we recommend Heat Transfer Clothing

• Men's Clothing
• Women's Clothing

Non-Stock Pricing (marked with *)

• This item is a Drop Ship Item.
• This material will ship separately from your order.
• Material ships ground from Chemica US Corp- Norcross, GA. These rolls take up to 5 days to process before shipping ground.

• 300-320°F
• 15-20 seconds
• Cold Peel
• Medium pressure
• Cut in reverse
• Cotton, polyester, acrylic, and similar fabrics
• Wash inside out, cool (140° F), gentle cycle, tumble dry low heat

Additional Instructions

Cut Settings for Silhouette Cameo:

1. Smooth Heat Transfer Material Setting
2. Blade at a 2
3. Speed at 5, Pressure at 8

*Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Cut Settings for Graphtec CE6000:

1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16

*For Carbon, Leather, Basketball and Python we recommend a cut force of 23 on a Graphtec CE6000

*HTW uses a 45 Degree Blade
*Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

• Chemica Fashions PDF Instructions