• 305°F
• 15 seconds
• Peel Warm
• Medium/firm, even pressure
• Cut in reverse
• Adheres to 100% uncoated polyester,100% cotton and all poly/cotton blends
• Wait 24 hours before first wash, machine wash warm with mild detergent, dry on low dryer setting

Additional Instructions

Cut Settings for Graphtec:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

Force: 13

Speed: 35 cm/s

Offset: .250

Blade: 45 degree

Cut Settings for Silhouette Cameo:

Blade: Auto-Blade, 3

Speed: 8

Force: 10

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Glitter Iron-On

Blade: Standard

Cut Settings for Roland GX/GS-24:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Blade: 45 degree Gram

Force: 130-160

Offset: .250

Speed: 30 cm/s

Cut Settings for Scan N Cut:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Blade: Auto-Blade Cut

Speed: 1 Cut

Pressure: 4 *Half Cut On

Cut Settings for Titan:

Test Cutting is Recommended.

Blade: 45 degree / 60 degree

Gram Force: 100-110

Speed: 20-30 cm/s

Cut Settings for Mimaki CG-60SF III:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Blade: 45 degree

Gram Force: 95

Offset: 30

Speed: 20-30 cm/s