Contact Us

WALAKut Puff Plus

Write a Review

WALAKut Puff Plus adds that dimension and 3D look you are desiring! WALAKut Puff Plus HTV expands under the heat press and turns your garments from a flat look to an extra pop dimensional look. It goes from 60 microns thick before applying with a heat press to 500 microns thick once pressed!

  • 20" width
  • 5 yard rolls
  • Press twice to maximize 3D effect
  • White in color
  • Waterbased PU
  • 3D look
  • 60 microns (before heat transfer) 500 microns (after heat transfer)
  • Stretching of garments is NOT recommended as it may disrupt the bond of the garment
  • Not suitable for nylon or other coated textiles

5 yd Pricing

  • 285° F
  • 10-12 seconds
  • Peel Warm or Cold
  • Medium, even pressure
  • Cut in reverse
  • Polyester, cotton, poly/cotton blends
  • Wait 24 hours before washing. Wash inside-out. Tumble dry low. No dry cleaning or bleach.


2nd Press

Press for same amount of time and same temperature as first press to maximize 3D look. Do NOT use a teflon or parchment sheet for second press.

Cut Settings

  • Blade: Relief angle 30-45°
  • Pressure: Low/Medium
  • Speed: ≈40 cm/s
  • Recommended to test cut before full production


  • CINCINNATI PRODUCT; will make your entire order ship from our Cincinnati location.

Customers Also Bought