Frequently Asked Questions
What is Siser ColorPrint Easy ?
ColorPrint Easy is a great material to use to get started with printable vinyl! It is approximately the same thickness as your trusty EasyWeed, 80 microns, making it easy to cut, weed, and mask. This material requires zero dry time prior to cutting to help speed up your process. This material is also CPSIA certified so you can decorate children’s garments with confidence!
How do you Print Siser ColorPrint Easy ?
Simply print with an Solvent or Eco-Solvent Printer. ColorPrint Easy requires no dry time from the printer.
What Printers can print Siser ColorPrint Easy ?
Solvent & Eco-Solvent Printers
What Inks work on Siser ColorPrint Easy ?
Solvent & Eco-Solvent Inks
What Widths does Siser ColorPrint Easy come in ?
14.5", 20", 30", 54", 59"
How long are the rolls of Siser ColorPrint Easy ?
10 Yard, 25 Yard, 50 Yard
14.5" Pricing:
10 yd roll = $58.95
25 yd roll = $134.95
50 yd roll = $249.95
20" Pricing:
10 yd roll = $76.64
25 yd roll = $178.34
30" Pricing:
10 yd roll = $110.62
25 yd roll = $265.59
50 yd roll = $503.99
54" Pricing:
50 yd roll = $986.99
59" Pricing:
50 yd roll = $986.99
Additional Instructions Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Recommended for use in Eco-Solvent and Solvent based Printer/Cutters
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment. Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard)
