• 325°F for 100%-50% cotton blends or 275°F for fabrics less than 50% cotton
• 20 seconds
• Cold
• Medium even pressure
• Print and cut right reading
• 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend
• Wash inside out in cold water. Use mild detergent. Do not use bleach. Dry on low. 

Additional Instructions

STEP BY STEP INSTRUCTIONS:

1. Bring paper to room temperature before printing
2. Load transfer sheets into your printer so that the image is printed on the unlined (non-glossy) side. 
3. Using your computer, select or design images to be transferred. DO NOT mirror or flip the image before printing. 
4. Print image/design on paper using the following recommended print settings
5. Use scissors to cut around the transfer artwork to remove excess
6. Preheat heat press to 325°F for 100%-50% cotton blends or 275°F for fabrics less than 50% cotton
7. Press fabric for 3-5 seconds to release moisture and remove wrinkles
8. Peel liner from back of transfer
9. Place printed transfer onto the fabric with the printed side up and cover completely with parchment paper
10. Set to medium pressure
11. Press for 20 seconds
12. Remove parchment paper from transfer using a smooth, even motion

STEP BY STEP INSTRUCTIONS:

1. Bring paper to room temperature before printing
2. Load transfer sheets into your printer so that the image is printed on the non-glossy (unlined) side.
3. Using your computer, select or design images to be transferred. Mirror or flip the image before printing.
4. Print image/design on paper using the following recommended print settings

HP

Media: Extra Heavy

OKI

Media: Heavy

RICOH

Media: Thick

CUTTING INSTRUCTIONS:

Use scissors to trim image/design from transfer sheet to remove excess area.

PRESSING INSTRUCTIONS:

1. Preheat press to 325 degrees
2. Press fabric for 3-5 seconds to release moisture and remove wrinkles
3. Place printed image face down on the garment (the lined side will be facing up)
4. Set at medium pressure for best results
5. Press for 20 seconds
6. HOT peel. Peel immediately for best results. Remove the backing paper from the transfer using a smooth, even motion while the transfer is still HOT.

WASHING INSTRUCTIONS:

1. Turn the garment inside out
2. Wash in COLD water
3. Use a mild detergent for best results
4. Do not use bleach or bleach alternative detergents
5. Remove the garment promptly from the washer (colors may bleed if left in the washer)
6. Dry on LOW temperature

ADDITIONAL NOTES:

1. Test results demonstrate better color retention after washing using hot peel method
2. When transferring several images to the same fabric, wait until all images are transferred before peeling the backing paper to prevent the heat from affecting already transferred images
3. Store unused transfer papers in a resealable polybag in a flat, cool, dry area