WALAPaper Inkjet Light Smooth 11x17

• 350°F
• 25-30 seconds
• Peel Hot
• Even medium pressure
• Print and cut in reverse
• 100% Cotton, 100% Polyester, 50/50 Cotton/Poly blend
• Wait 24 hours before washing. Machine wash using mild detergent. Do not use bleach or other aggressive cleaning agents. Cannot be dry cleaned. Wash Temperature cannot exceed 105F. To increase color vibrancy, it is recommended to iron the image after each launder.

Additional Instructions

STEP BY STEP INSTRUCTIONS:

1. Bring paper to room temperature before printing
2. Load transfer sheets into your printer so that the image is printed on the non-glossy (unlined) side.
3. Using your computer, select or design images to be transferred. Mirror or flip the image before printing.
4. Print image/design on paper using the following recommended print settings

HP

Media: Premium Matte Photo Paper
Print Mode: Normal or Best

Epson

Media: Plain Paper
Print Mode: Photo

Canon

Print Type: Standard
Media: T-Shirt Transfer
Print Mode: Standard

CUTTING INSTRUCTIONS:

Use scissors to trim image/design from transfer sheet to remove excess area.

PRESSING INSTRUCTIONS:

1. Preheat press to 350 degrees
2. Press fabric for 3-5 seconds to release moisture and remove wrinkles
3. Place printed image face down on the garment (the lined side will be facing up)
4. Set at medium pressure for best results
5. Press for 25-30 seconds
6. HOT peel. Peel immediately for best results. Remove the backing paper from the transfer using a smooth, even motion while the transfer is still HOT.

WASHING INSTRUCTIONS:

1. Turn the garment inside out
2. Wash in COLD water
3. Use a mild detergent for best results
4. Do not use bleach or bleach alternative detergents
5. Remove the garment promptly from the washer (colors may bleed if left in the washer)
6. Dry on LOW temperature

ADDITIONAL NOTES:

1. Test results demonstrate better color retention after washing using hot peel method
2. When transferring several images to the same fabric, wait until all images are transferred before peeling the backing paper to prevent the heat from affecting already transferred images
3. Store unused transfer papers in a resealable polybag in a flat, cool, dry area