For your garment needs, we recommend Heat Transfer Clothing
20" Pricing:
1 yd roll = $8.50 (Black and White ONLY)
5 yd roll = $38.00
10 yd roll = $70.00
25 yd roll = $155.00
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 20
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 2
3. Speed at 8, Pressure at 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: More
Blade: Fine-Point Blade (Standard)
This will not last on moisture wicking uniform tops (which is what most uniform tops are made of now)! I've done 3 sets with it, they haven't lasted a couple months. Makes for bad business, especially when you're making them for a public school! They have to last! Instructions should be more clear on this!
