Star of David HTV

Write a Review

Quantity: *

Price: $45.00

Current Stock:

Sku: CD28912-5

DISCLAIMER! This product requires a heat transfer mask to properly work. May delay your order 1-3 business days.

This product requires mask. KTM Mask or 850 Mask
11" printed workable space
Matte finish
Mask & Squeege is no longer included in your order, click here to purchase your mask
If ordering this product it may delay your standard shipping times depending on order value and time order was placed
Please see our shipping policies
May delay your order 1-3 business days; depending on the time the order is placed and the quantity.
This is a Fargo only item, your entire order will ship from Fargo. Transit times may vary.
This is a non-returnable product
Colors are subject to change without notice
Accessories
Fashion Sign Vinyl Prints

Patterned Vinyl from Start to Finish

How to Cut and Apply Patterned HTV

Cotton, Polyester, and 50/50: 266°F | Nylon: 302°F
Cotton, Polyester, and 50/50: 5 seconds Nylon: Preheat for 5 seconds and press for 5 seconds. remove liner and cover with a teflon sheet and press for another 10 seconds
Peel warm
Medium, even pressure
Cut right reading
Cotton, Polyester, Uncoated Nylon, 50/50 blends
Wash inside out. Tumble dry.

Additional Instructions

Cut your design right reading
Weed away excess material
Mask your design with a recommended mask
Remove the liner of the mask
Press your design at one of the temps and times listed above
Peel warm

CUT SETTINGS

Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 1
3. Speed at 5, Pressure at 6
4. Double Cut/Cut on Mat

FARGO PRODUCT; will make your entire order ship from our Fargo location.