Siser Easy Puff Heat Transfer Vinyl 12"
Siser Easy Puff 12" HTV is a unique heat transfer material that puffs up to create bold, raised 3D textured designs on your garments.
With a sticky carrier and low application temperature, it’s great for chest logos, youth apparel, and varsity lettering. Apply Siser Easy Puff as your final layer for the best puff effect and durability.
View our wide format Siser Easy Puff 20" here.
This vinyl puffs to create its 3d textured look with one press. Repeated applications will “flatten” the puff effect permanently. Achieving proper, firm pressure is important with Easy Puff, and therefore it is not recommended to apply this material with a home iron. View our application instructions below for more information.
Material Details
- 140 microns thick
- Raised puff finish with textured feel
- 12” Wide (material may vary in width by 1/4-1/2" due to the manufacturing process)
- Sticky liner
- CPSIA certified for use on children's clothing
-
Need help with your artwork? Check out our Artwork and Mockup Resources.
Related 3-Dimensional Vinyl
CUT SHINY SIDE UP
- 280°F
- 8-10 seconds
- Peel Hot
- Firm, even pressure
- Cut in reverse
- 100% Cotton, 100% Polyester, Cotton/Poly Blends
- Wash inside-out, cold water, gentle cycle, tumble dry low
Additional Instructions
CUT SHINY SIDE UP
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
- 1. Offset: 0
- 2. Speed: 8 cm/s
- 3. Acceleration: 4
- 4. Cut Force: 18
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
- Material: Heat Transfer, Smooth
- Blade: 3
- Speed: 8
- Force: 10
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
- Set Material: Iron-On
- Pressure: Default
- Blade: Fine-Point Blade (Standard)
