• Place EasyPSV with the liner side down and cut your design. (DO NOT reverse/mirror your design.)
• Weed excess vinyl.
• Weed material
• Remove the application tape's paper liner. Place tape on top of EasyPSV and burnish with a squeegee.
• Lift the application tape and EasyPSV away from the paper liner to expose the removable adhesive
• Place the application tape on your desired object and burnish with a squeegee to fully adhere the design.
• Gently peel away the application tape, leaving just your EasyPSV design on the object.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16 *HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 1

Speed: 3

Force: 4

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Vinyl

Pressure: Default

Blade: Fine-Point Blade (Standard)