Siser EasyPSV Patterns

• Cut right reading
• Adheres to hard surfaces

Additional Instructions

1. Cut image in right reading
2. Weed material
3. Squeegee transfer mask over image
4. Remove the white backing (images will stick to the transfer mask)
5. Squeegee images onto surface
6. Remove transfer mask

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 1

Speed: 3

Force: 4

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Vinyl

Pressure: Default

Blade: Fine-Point Blade (Standard)