null
Contact Us

StripFlock Pro Fluorescent 12"

Write a Review

Siser's StripFlock Fluorescent Pro is a heat transfer vinyl that gives designs a suede textured look with a raised feel. With the wide variety of color options and the ability to layer, this product will give you the unique look, you desire!

  • 311° F
  • 10 - 15 seconds with 10 second repress if design lifts after initial press
  • Peel hot or cold
  • Medium even pressure
  • Cut in reverse
  • 100% cotton, Poly/cotton blends, 100% polyester, Leather
  • Wait 24 hours before first wash. Machine wash warm with mild detergent. Dry on normal dryer setting. Do not dry clean.

Additional Instructions

  • Cut Settings for Graphtec:

    Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

    Gram Force: 10

    Speed: 30 cm/s

    Tool: CB09U+0

    Blade: 45 degree

    Cut Settings for Silhouette Cameo:

    Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

    Material: Heat Transfer, Flocked

    Blade: 4

    Speed: 5

    Force: 6

    Cut Settings for Cricut®:

    Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

    Set Material: Iron-On

    Pressure: Default

    Blade: Fine-Point Blade (Standard)

    Cut Settings for Roland GS/GX-24:

    Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

    Blade: 45 degree

    Gram Force: 80-120

    Offset: .250

    Speed: 30 cm/s

    Cut Settings for Cricut:

    Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

    Blade: Standard

    Setting: Iron-On +

    Cut Settings for Scan N Cut:

    Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

    Blade: Standard, 4

    Cut Speed: 1

    Cut Pressure: 2

    Cut Settings for Titan:

    Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

    Blade: 45 degree / 60 degree

    Gram Force: 100-110

    Speed: 180 mm/s

    *Blade Advancing Varies

  • This product has options that are DROPSHIP ONLY and, if selected, this material will be sent via ground shipping from the manufacturer and will ship separately from your order.
FAQ

Customers Also Bought