Siser Holographic Pearl PSV gives you the same shiny effect of Siser Holographic with a unique, pearlescent and color changing finish, and in adhesive vinyl! The light tack make it easy to remove. In addition to the holographic pearl effect
- 20" width
- Pearlescent finish
- Hues and color vary with movement and angles
- Translucent appearance changes look with each surface it is applied to
- Light tack
- Recommended for indoor use only
- Gloss finish
- Siser EasyPSV
- Adhesive Vinyl
-
Need help with your artwork? Check out our Artwork and Mockup Resources.
- Step 1: Use SiserPSV Application Tape Cut right reading Adheres to hard surfaces
- Step 2: Cut image in right reading
- Step 3: Weed material
- Step 4: Squeegee transfer mask over image
- Step 5: Remove the white backing (images will stick to the transfer mask)
- Step 6: Squeegee images onto surface
- Step 7: Remove transfer mask
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16 *HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 1
Speed: 3
Force: 4
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Vinyl
Pressure: Default
Blade: Fine-Point Blade (Standard)
