• 305°F
• Pre-press garment for 2-3 seconds then press transfer for 15 seconds
• Peel Hot or Cold
• Medium, even pressure
• Cut in reverse
• 100% cotton, Poly/cotton blends, 100% polyester, Leather
• Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach. Dry at normal setting

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

 Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*Heat Transfer Warehouse uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

• EasyWeed Electric PDF Instructions
• EasyWeed Pantone Colors