Siser EasySubli Sublimation HTV for Cotton and dark shirts
Siser's EasySubli is the latest innovation in sublimation. Give the vibrant look of dye sublimation on 100% cotton and Poly/Cotton blends! It's a matte heat transfer vinyl that's receptive to sublimation inks! Great for decorating colored polyester and cotton blends... no more be limited to white polyester again. EasySubli achieves the brightest colors and best results when paired with the specially developed printing profile and Siser EasySubli inks by Sawgrass.
- Sheet or Roll options
- To be used with SG500 or SG1000 dye sublimation printers
- Polyester composition
- For the best vibrant prints, this material needs to be cured. To cure the material place the printed material on a warm platen and hover the platen over it at 311 degrees for 60 seconds without closing the press
- Static backing
- Matte Finish
- 220 microns / 8.66 Mils thick
- Layering not recommended
- Use 45°/60° blade
- Thermotransfer film with plain polyester backing
- Recommended to be used with Siser EasySubli Inks
- Vibrant color with a thin feel
- Allows the look of dye sublimation on cotton fabric
- Please note that EasySubli is NOT compatible with latex or Inkjet/toner based printers/copiers.
- CPSIA certified
- Product Information
-
Need help with your artwork? Check out our Artwork and Mockup Resources.
Other Siser EasySubli products:
- 311° F
- Preheat garment for 2-3 seconds. Press transfer at 15 seconds
- Peel Warm
- Medium, even pressure
- Cut in right reading
- 100% cotton, 100% light-colored polyester, Poly/cotton blends (not for dye sublimation fabrics)
- Wait 24 hours before the first wash, do not dry clean, max water temperature 160 °F, Dry on normal settings, so not use bleach
Additional Instructions
Additional Instructions Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
For the best vibrant prints, this material needs to be cured. To cure the material place the printed material on a warm platen and hover the platen over it at 311 degrees for 60 seconds without closing the press
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment. Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 30 cm/s
3. Acceleration: 4
4. Cut Force: 8-9
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 15
Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard)
