• See below for temperature on different garments
• See below for time on different garments
• Peel warm Medium, even pressure
• Cut your design right reading
• Cotton, Polyester, Uncoated Nylon, 50/50 blends
• Wash inside out. Tumble dry.

Additional Instructions

For Cotton, Polyester, 50/50 blends

Temp      Time

266° F : 5 seconds

302° F: 4 seconds

320° F: 3 seconds

For NYLON

Press at 302° F

Preheat garment for 5 seconds.

Press for 5 seconds then remove liner and cover transfer with a teflon sheet and press for another 10 seconds.

Additional Instructions

Print and cut your design right reading

Weed away excess material

Press your design at one of the temps and times listed above

Peel warm  

CUT SETTINGS

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

1. Smooth Heat Transfer Material Setting

2. Blade at a 1

3. Speed at 5, Pressure at 6

4. Double Cut/Cut on Mat Digital Patterns

• PDF Instructions