WALAKut Soft Metal Silver Tiger Heat Transfer Vinyl – Durable Metallic HTV for Custom Apparel
WALAKut Soft Metals are a great heat transfer vinyl to add value and style to your heat transfer garments. They have a soft metallic finish that is smooth, with the look of metal. WALAKut Soft Metals are durable and stretchy, and will take on the texture of garment when heat press applied.
Easy to Use and Layer
With its smooth cutting film, WALAKut Soft Metal is easy to cut and works with all plotters. This vinyl can be layered on top of other designs or inlaid for unique, eye-catching results. Test cuts are recommended before large runs to ensure flawless application on specialty fabrics.
Perfect for Various Fabrics
WALAKut Soft Metal Silver Tiger works best on cotton, uncoated polyester, and fabric blends, bringing stylish and durable designs to custom garments. Wash inside-out with cold water on a gentle cycle for long-lasting results. It’s also suitable for dry-cleaning, offering added convenience for garment care.
- 20" width
- Smooth metallic finish
- Silver Tiger pattern
- Can be layered on top or inlay
- 3 mils/75 microns
- Durable and stretchy
- Add value to any design
- Easy cutting film for all styles of plotters
- Test before doing high runs of Dazzle cloth or shiny polyester fabrics
- WALAKut HTV
- WALAPresses
- Accessories
- Heat Transfer Equipment
- 302°F - 320°F
- 7-8 seconds
- Peel Warm - Repress for 3-5 seconds
- Medium pressure
- Cut in Mirror Image
- Cotton, Uncoated Polyester, Fabric Blends, Poly/Acrylic ** NO NYLON
- Wash Inside Out, Gentle Cycle, Cold Water, Tumble Dry Low. Suitable for Dry-Cleaning.
-
Need help with your artwork? Check out our Artwork and Mockup Resources.
Additional Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 18
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 7
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
20" Pricing:
3 foot roll = $11.00
5 yd roll = $47.00
10 yd roll = $90.00
25 yd roll = $204.00
54 yd roll = $382.00
12" x 12" sheet = $4.00
