ThermoBanner2 - Sunmark

• Great for awnings, tents, tire covers, umbrellas, truck side covers, etc.
• 88 microns
• Excellent outdoor durability
• 20" width
• Due to the manufacturing process, material may vary in width by 1/8-1/4

• 210-285° F
• 10-15 seconds
• Very light pressure. Use hand iron, standard heat press, or heat gun.
• Cut in mirror image
• Heat-sensitive surfaces. Coated canvas, most vinyls and plastic coated surfaces.
• No need to wash, as this is used more for awnings, umbrellas, and banners.

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

 Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Write a Review

ThermoBanner2 - Sunmark