ThermoFlex Xtra (Nylon)

Looking for a vinyl that goes onto your Nylon garments? This is the perfect product for that and more! Will adhere to nylon, leather and other heat-sensitive surfaces (i.e. flags, wind jackets, jerseys)

• Easy cutting weeding
• PU film
• Approximately 100 Microns thick
• Will adhere to some silicon-coated materials
• Some colors will not layer
• Due to the manufacturing process, material may vary in width by 1/8-1/4"
• ThermoFlex Pantone Swatches
• Accessories
• ThermoFlex Plus
• Discounted Colors

For your garment needs, we recommend Heat Transfer Clothing

• Men's Clothing
• Women's Clothing

• 250-310° F
• 5 seconds. Peel then cover with Teflon and repress 10-15 seconds.
• Peel COLD!
• Medium, even pressure
• Cut in reverse
• Nylon, Leather, Polyester and Heat Sensitive Fabrics. Can be used on other fabrics - test for durability
• Wait 24 hours before first wash. Turn inside out, cold water, tumble dry low. *Follow wash instructions for nylon.

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

*Please be advised that dye migration has occurred with low energy dyes in polyester and poly-blend fabrics.

Cut Settings for Graphtec CE6000:

 Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

 Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

• ThermoFlex Xtra (Nylon) PDF Instructions
• ThermoFlex Pantone Swatches