ThermoFlex Plus Metallics is a great soft hand feel product that gives your garments that metallic look without the stiffness! Flexible and gives a soft hand feel when pressed onto a garment Gives a strong grip when heat pressed onto a garment Will not adhere to nylon
- 315-330°F
- 15 seconds
- Peel warm or cold Medium, even pressure
- Medium pressure
- Cut in reverse
- Cotton, linen, wool, lyrca, polyester blends, and spandex
- Wait 24 hours before first wash. Wash warm, tumble dry on normal setting
Additional Instructions
Application instructions
for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
- ThermoFlex Pantone Swatches
