ThermoFlex Plus and Turbo Metallics Heat Transfer Vinyl
ThermoFlex Plus Metallics and ThermoFlex Turbo Metallics bring a bold, reflective shine to your designs without sacrificing comfort. Both are premium polyurethane-based HTVs that cut, weed, and press beautifully while delivering long-lasting durability and a soft hand feel. Whether you’re adding standout metallic accents or creating full designs, these films give your projects a professional, eye-catching finish.
The difference? Turbo Metallics presses at lower temperatures and faster times, making it perfect for delicate fabrics or high-volume shops. Plus Metallics is the trusted classic, delivering that same soft metallic look with a slightly higher press temp and time. Both provide the same dependable quality decorators rely on for garments that last.
Why Choose ThermoFlex Plus or Turbo Metallics?
- Metallic finish – shiny, bold look with soft hand feel
- PU composition – durable, flexible, and comfortable to wear
- Strong adhesive – pressure-sensitive carrier makes weeding small details easy
- Turbo: Low-temp (265–300°F), fast press (3–5 sec), safe for nylon & delicate fabrics
- Plus: Standard press (315–330°F), 15 sec, industry-trusted performance
- Designed to last the life of the garment when properly applied
Fabric Compatibility
- Cotton, polyester, cotton/poly blends, spandex, Lycra®
- Turbo only: Also applies to nylon and some coated fabrics
- Not recommended: Mesh or treated surfaces unless prepped as directed
12" Pricing
Sheet = $3.50
5 yd roll = $35.00
10 yd roll = $68.00
30 yd roll = $155.00
15" Pricing
5 yd roll = $38.75
10 yd roll = $74.00
30 yd roll = $192.00
20" Pricing
5 yd roll = $43.00
10 yd roll = $82.00
30 yd roll = $234.00
- Plus: 315-330°F Turbo: 365-300°F
- Plus: 15 seconds Turbo: 5 seconds
- Peel warm or cold Medium, even pressure
- Medium pressure
- Cut in reverse
- Cotton, linen, wool, lyrca, polyester blends, and spandex
- Wait 24 hours before first wash. Wash warm, tumble dry on normal setting
Additional Instructions
Application instructions
for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
- Offset: 0
- Speed: 25 cm/s
- Acceleration: 4
- Cut Force: 16
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
ThermoFlex Pantone Swatches
