Graphtec FC9000-140 Plus 54" Cutter is Graphtecs most advanced, and versatile roll fed cutting plotter to this day. This vinyl cutter has a lot to offer from its features and accessories.
|Configuration||Grit rolling plotter|
|Drive method||Digital servo drive|
|Max. cutting speed||58.5 inches per second (45 degree direction) 41.3 (axis direction)|
|Cutting force||Max. 600 gf in 48 steps|
|Axial acceleration||Max. 39.2 m/s (4 G) in 8 steps|
|Max cutting area||54 in x 164 ft.|
|Guaranteed precision cutting area||53 in x 32 ft|
|Mountable media width||Min. 1.96 in Max. 60.20 in|
|Max. cross cut width||54 inches|
|Number of push rollers||4 rollers|
|Compatible roll media diameter||Min. 2.99 in Max. 7.8 in (Max diameter is 6.29 in when included flange is installed)|
|Mechanical resolution||0.005 mm|
|Programmable resolution||GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL: 0.025 mm|
|Distance accuracy||Max. 0.1 mm or 0.1% of plotted length|
|Repeat ability||Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media)|
|Minimum character size||Approx. 5 mm alphanumeric (varies depending on character font and media)|
|Mountable number of tools||
1 tool (cutting blade, plotting pen or pouncing tool) in standard;
2 tools (cutting blade and plotting pen) when second pen holder (optional) is installed
|Blade types||Supersteel (0.9 mm or 1.5 mm diameter)|
|Pen types||Water-based fiber-tip pen, oil-based ballpoint pen|
|Pouncing tool type||Steel tip 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12)|
|Media types||Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
Sandblast resist rubber up to 1 mm thick
|Compatible paper for pouncing||Regular paper from 0.06 to 0.13 mm thick|
|Cross-cutter||Built into the tool carriage|
|Perforation cutting||Supported (performed by force control)|
|Interface||USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX|
|Buffer memory||2 MB|
|Command sets||GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select)|
|Condition settings||Dual configuration (save two (2) user settings with eight (8) separate condition settings per user)|
|Display||Graphic type LCD (3.7-inch, backlight)|
|Power source||100 V to 240 V AC, 50 / 60 Hz|
|Power consumption||AC100-240 V, 50/60 Hz|
|Operating environment||50 to 95 ºF, 35 to 75 % R.H. (non-condensing)|
|Guaranteed accuracy environment||60 to 89 ºF, 35 to 70 % R.H. (non-condensing)|
|External dimensions (WxDxH)||Approx. 73.6" x 28" x 48"|
178 lbs /w take up
|Included software||Windows driver, Plotter controller, Graphtec Pro Studio (5), Cutting Master 4, Graphtec Studio for Mac|
|Compatible OS||Windows 10 / 8.1 / 7
Mac OS X 10.6 to 10.11
Mac OS 10.12 to 1.14
Graphtec Studio: 10.6 to 10.14
Cutting Master 4: 10.7-10.14
|Safety||PSE, UL/cUL, CE mark)|
|EMC||VCCI Class A, FCC Class A, CE mark|
*1: Operated with Graphtec specified cutting conditions and media. For long-length cutting, the basket is used.
*2: There are conditions for operation when setting the media.
*3: HP-GL is a registered trademark of Hewlett-Packard Company.
*4: CB15UA/CB15UA-K30 blades and reinforced backing sheets are recommended for certain grades of high- intensity reflective film.
*5: Graphtec does not support software / drivers used with operating systems that have become obsolete and are no longer supported by the OS developer.
*6: The software is available for download from Graphtec’s website.
*7: It requires an internet connection in order for activation or registration when starting the software for the first time.
*8: Includes stand and basket.