Don't have a cutter? Don't have time to cut your HTV? No problem! Custom Cut Standard HTV Transfers will save you the time of cutting and money of buying your own cutter! All you need is a heat press to apply. Submit your cut file and select the details needed and you will receive your very own custom cut HTV!
Custom cutting eliminates the hassle of using a cutter. Our pre-cut HTV transfers save valuable time and money. No cutting or weeding required. Just submit your vector artwork and press it easily with a heat press.
Our low-temperature HTV material is designed for use on a wide variety of fabrics. From cotton to nylon, it adheres well to multiple materials. The transfers arrive pre-cut and weeded, ready to apply. Perfect for heat-sensitive items that need a gentler touch.
Pricing:
6 Square Inches
1-5 pieces = $1.50 each
6 + pieces = $1.30 each
10 Square Inches
1-5 pieces = $2.25 each
6 + pieces = $2.00 each
15 Square Inches
1-5 pieces = $2.96 each
6 + pieces = $2.14 each
20 Square Inches
1-5 pieces = $3.37 each
6 + pieces = $2.76 each
25 Square Inches
1-5 pieces = $3.52 each
6 + pieces = $3.09 each
30 Square Inches
1-5 pieces = $4.35 each
6 + pieces = $4.13 each
35 Square Inches
1-5 pieces = $3.98 each
6 + pieces = $3.78 each
40 Square Inches
1-5 pieces = $4.33 each
6 + pieces = $4.11 each
50 Square Inches
1-5 pieces = $4.60 each
6 + pieces = $4.37 each
55 Square Inches
1-5 pieces = $4.99 each
6 + pieces = $4.75 each
60 Square Inches
1-5 pieces = $5.39 each
6 + pieces = $5.12 each
70 Square Inches
1-5 pieces = $6.14 each
6 + pieces = $5.83 each
80 Square Inches
1-5 pieces = $6.67 each
6 + pieces = $6.34 each
90 Square Inches
1-5 pieces = $7.30 each
6 + pieces = $6.94 each
100 Square Inches
1-5 pieces = $7.58 each
6 + pieces = $7.20 each
120 Square Inches
1-5 pieces = $8.56 each
6 + pieces = $8.13 each
150 Square Inches
1-5 pieces = $9.58 each
6 + pieces = $8.85 each
- See below for temperature on different garments
- See below for time on different garments
- Warm
- Medium, even pressure
- Cut in reverse
- Cotton, polyester, blends, nylon, uncoated nylon, acrylics, spandex, lycra, vinyl, and genuine leather.
- Wash warm/cold. Suitable for tumble dry and dry cleaning but not if applied to Nylon garments.
Additional Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cotton
[medium pressure]
265° F - 5 sec.
300° F - 4 sec.
320° F - 3 sec.
Cotton/Polyester
[medium pressure]
265° F - 5 sec.
300° F - 4 sec.
320° F - 3 sec.
Polyester/Acrylic
[low pressure]
300°F - 5 sec.
Impregnated Textiles (Nylon, etc.)
[low pressure]
300°F
• Pre Heat 5 sec.
• Apply to Nylon 5 sec.
• Remove PET liner, cover transfer with silicon paper & apply for further 10 sec.
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
Application instructions for dazzle cloth & shiny polyester materials:
We highly recommend that you wash and dry your garments prior to pressing your design. This will allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 17
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
