• 270-290°F
• Medium even pressure
• Use with DTF, White Toner, and Inkjet transfer paper.

Additional Instructions

• Reusable up to 500 presses
• Do not use with temperatures over 300°F
• Ideal temperature range: 270-290°F
• Use as finishing sheet only and should not be used in place of teflon, silicone, or parchment cover sheet when pressing
• Only use for last press
• For use with DTF, White Toner, and Inkjet transfer paper.
• DO NOT USE with polymer (CP) toners or sublimation inks

1. Once you’re pressed and peeled your transfer according to your media’s requirements, let it cool.
2. Use T.Seal as the final press. Place the coated, rubbery side down on your image and press for 30 seconds using a heavy pressure at a temperature between 270-290° F. Do not exceed 300° F. This will cause your sheet to degrade quickly!
3. Open the press, wait a moment, then peel the T.Seal sheet off slowly, starting at one side of the sheet.
4. Enjoy your sealed and finished garment with an improved feel and increased durability!