Additional Instructions

1. Cut a piece of mask slightly wider than the image to cover 

2. Remove the paper backing from the mask and set aside 

3. Adhesive side up, place the mask down on a smooth firm surface

4. With the image facing down, center it on the mask, letting the middle drop down on to the adhesive, followed by the rest of the image 

5. Place your squeegee at a 45° angle over the center of the image

6. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air between the image and the mask 

7. Repeat this process in several directions 

8. Lift a corner of the mask. Use a steady motion to separate the mask from the image