Siser Glitter HTV 20"

Add some bling to your designs to stand out from the rest with Siser Glitter HTV ! When using Siser Glitter, you will get the most sparkle without all the shedding of glitter flakes on your hands! This is great for kids of all ages that love the shimmer look and it's safe to apply on their clothing too since it's CPSIA Certified. Siser white Glitter can also be directly sublimated too! 

• 20" width material
• High-quality glitter with a textured feel
• Works as embroidery applique
• Glitter can be layered as top level or inlay (shown)
• Laser friendly
• Approximately 325 Microns/12.8 Mils thick
• Note: Material may peel back from the liner. In that case, we recommend smoothing it down, if needed, prior to cutting
• Material may vary in width by a 1/2" – 1" 
• Not made for fine-cut designs
• Composition: PU
• Accessories
• Click here for shipping and converting guidelines

For your garment needs, we recommend Heat Transfer Clothing

• Men's Clothing
• Women's Clothing

Questions & Answers

Is it good for very small detail? Always do a test cut small detail can be difficult to weed

How can I achieve the layered look? You can knock out the two layers from each other in your vector program. Both glitter vinyls need to be pressed onto the shirt, not on top of each other.

Can you layer Siser Glitter HTV? yes the glitter can be the top layer on top of the HTV 

Can I layer other  HTV vinyl or products on top of Glitter? do to the nature of glitters surface it will not always adhere to the glitter and could peel off.

• 320°F
• 15 seconds
• Peel Warm
• Medium to firm pressure
• Cut mirror image
• Cotton, polyester, fabric blends, lycra, wool, linen
• Wash warm, tumble dry normal

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. test cutting is recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 23

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 4

Speed: 8

Force: 11

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: More

Blade: Fine-Point Blade (Standard)

• Siser Glitter 20" PDF Instructions