Contact Us

Siser EasyWeed Extra (Nylon) 15"

Write a Review

Price: $42.99




Siser EasyWeed Extra (Nylon) 15"

 

Siser EasyWeed Extra is your go-to heat transfer vinyl for adhering to nylon with all the same great benefits of EasyWeed! EasyWeed Extra can be used for detailed logos due to the pressure-sensitive carrier it's on which has your designs weed effortlessly. You can peel your designs hot or cold which offers you the option to peel each design as it comes off your heat press. You also could stack all applied garments and peel after your job is complete. Siser EasyWeed Extra is a semi-gloss finish and can be layered which provides the opportunity to do multi-colored designs for your customers.  EasyWeed Extra is CPSIA Certified, so it’s perfect for decorating items intended for children. 15" width material Will adhere to nylon, leather and heat-sensitive fabrics Test substrate under heat before pressing PU CPSIA Certified 

 

 

15" Pricing:

3 foot roll = $10.99
5 yd roll = $42.99
10 yd roll = $78.99
25 yd roll = $181.99
50 yd roll = $344.99

  • 305° F
  • 10 - 15 seconds
  • Peel hot or cold
  • Medium pressure
  • Cut in reverse
  • Polyester, cotton, poly/cotton blends, nylon
  • Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener.

Additional Instructions

Additional Instructions Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment. Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard) Siser EasyWeed 15" PDF Instructions Siser EasyWeed Pantone Color Chart


  • This product has options that are DROPSHIP ONLY and, if selected, this material will be sent via ground shipping from the manufacturer and will ship separately from your order.


Customers Also Bought