Siser EasyWeed 15"

Siser EasyWeed Heat Transfer Vinyl is a polyurethane film that is a ready-to-cut vinyl for custom garment decoration. With Siser Easyweed, it is actually a heat transfer film since it has no adhesive backing. EasyWeed is adhered to any garment of your choice by a heat press. EasyWeed is thinner than other heat transfer vinyls which also offers a quick one-second tack application which is great for layering! EasyWeed can be cut with laser cutting systems. EasyWeed is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories. Here are some of the outstanding features of Siser EasyWeed which include: 

• Peel hot or cold
• Can layer
• Semi-gloss finish 
• 90 microns/3.5 Mils Thick
• Can be used with a Laser Cutter
• Presses at a low temp with low pressure
• Will not adhere to nylon
• ** indicate that these are HTW colors
• Due to the manufacturing process, material may vary in width by 1/8-1/4"
• Composition: PU
• CPSIA Certified
• Fluorescent colors 
• Accessories
• Siser Easyweed 20" width

For your garment needs, we recommend Heat Transfer Clothing

• Men's Clothing
• Women's Clothing

• 305° F
• 10 - 15 seconds
• Peel hot or cold
• Medium pressure
• Cut in reverse
• Polyester, cotton, poly/cotton blends
• Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener.

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

• Siser EasyWeed 15" PDF Instructions
• Siser EasyWeed Pantone Color Chart