Puff Heat Transfer Vinyl 10"
WALAKut Puff is a puff heat transfer vinyl that is easy to weed, easy to use, and only requires one press. WALAKut Puff has the largest variety of color options of any puff heat transfer vinyl.
Product Details
- Actual width approx 9.75"
- 125-170 microns thick
- Sticky liner
- Textured feel
- Raised puff finish
Important Product Details
Other dimensional products
Frequently Asked Questions
How do you use WALAKut Puff HTV?
WALAKut Puff HTV is best used to add dimension and pop to designs.
How to press WALAKut Puff HTV?
Always follow the application instructions, but some great tips are.
- Sometimes, temperature can fluctuate with puff vinyl. If the HTV is acting weird, drop the temp by 10 degrees and try again.
- Get the right pressure.
- Make sure the heat settings are correct for the vinyl.
- Do not overcook!
How to cut WALAKut Puff HTV?
Cut shiny side up! Other than that, just follow the application instructions and it will cut like any other vinyl.
Can you layer WALAKut Puff HTV?
Rather than layering puff HTV on top of standard HTV, we recommend doing an inlay for your design. Press the standard HTV parts of the design first, then the puff portion of your design last
What side do you cut WALAKut Puff HTV?
Cut shiny side up!
CUT SHINY SIDE UP
- 305°F
- 10 seconds
- Peel Hot
- Medium, even pressure
- Cut in reverse
- Cotton, Uncoated Polyester, Fabric Blends, Polyester/Acrylic, and Similar Fabrics NO NYLON
- Wash inside-out, cold water, gentle cycle, tumble dry low
CUT SHINY SIDE UP
- 305°F
- 10 seconds
- Peel Hot
- Medium, even pressure
- Cut in reverse
- Cotton, Uncoated Polyester, Fabric Blends, Polyester/Acrylic, and Similar Fabrics NO NYLON
- Wash inside-out, cold water, gentle cycle, tumble dry low
10" (9.75") pricing:
9x12 sheet = $4.00
1 yd roll = $8.00
5 yd roll = $35.00
10 yd roll = $58.00
27 yd roll = $140.00
