Multi-Color Custom HTV Transfers – Mix and Match Colors and Styles
Make standout designs without the hassle. Our Multi-Color Custom HTV Transfers let you combine standard HTV, Glitter, Reflective, Metallic, Neon, Flock, Brick, and even rhinestones into one single, ready-to-press transfer. No layering. No alignment. No guesswork. Just place, press, and go.
Efficiency & Material
Stop spending hours aligning multiple colors. We combine various HTV colors and textures into one cohesive, ready-to-press design. Our low-temperature, CPSIA Certified HTV adheres reliably to a wide range of fabrics, from cotton to heat-sensitive nylon, making it ideal for nearly any garment.
Ordering & Production
- Artwork: Must be submitted in Vector Format. A vector conversion service is available if needed. For larger sizes, please email Transfers@heattransferwarehouse.com.
- Transfers: Multi-color transfers with minimum quantity of 50 required. Transfers arrive cut and weeded on a carrier sheet.
- Timeline: Orders have 1–2 business days processing (artist contact will follow) and require approval before starting. Production is typically 10-14 business days after final approval—any changes may extend the timeline.
Custom Quote Required
This product is only available for purchase through a Custom Quote.
CLICK HERE to get started!
- See below for temperature and time for different garments.
- Press warm with medium, even pressure.
- Cut design in reverse when needed.
- Compatible fabrics: cotton, polyester, blends, nylon, uncoated nylon, acrylics, spandex, lycra, vinyl, and genuine leather.
- Care: wash warm/cold. Suitable for tumble dry and dry cleaning except on nylon garments.
Additional Tips:
For dazzle cloth, shiny polyester, and coated fabrics: dampen a cloth with rubbing alcohol (isopropyl), gently apply to the area, let dry, then press the transfer. Pre-wash garments for best adhesion.
Pressing Instructions by Fabric:
- Cotton [medium pressure]: 265°F – 5 sec, 300°F – 4 sec, 320°F – 3 sec.
- Cotton/Polyester [medium pressure]: 265°F – 5 sec, 300°F – 4 sec, 320°F – 3 sec.
- Polyester/Acrylic [low pressure]: 300°F – 5 sec.
- Impregnated Textiles (Nylon, etc.) [low pressure]: 300°F – Preheat 5 sec, apply to nylon 5 sec, remove PET liner, cover with silicon paper & press 10 sec.
Cutting Settings:
- Graphtec CE6000: Offset 0, Speed 25 cm/s, Acceleration 4, Cut Force 17, Blade 45°.
- Silhouette Cameo: Material: Heat Transfer (Smooth), Blade 3, Speed 8, Force 6.
- Cricut®: Material: Iron-On, Pressure: Default, Blade: Fine-Point (Standard).
Settings may vary based on blade sharpness and material; test cutting is recommended.
