Score a bulk deal on Siser Glitter HTV! This closeout bundle includes approximately 135 yards of material in assorted colors — all sold together as one lot. Perfect for high-volume projects or stocking up your shop at a deep discount. Limited quantity available – once it’s gone, it’s gone!
Product is physically shown in photos to show it in it's entirety. The rolls are approx 8" and range in width from 3 yards and up, some as much as 5 - or more. This product is an exceptional value and closeout. All sales are final.
Note, there are 16 rolls in this product listing of Siser Glitter. There is an assortment of colors.
- 320°F
- 15 seconds
- Peel Warm
- Medium to firm pressure
- Cut mirror image
- Cotton, polyester, fabric blends, lycra, wool, linen
- Wash warm, tumble dry normal
Additional Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Siser Juliet and Romeo:
Settings can alter for each cutter and how dull or sharp the blade is. test cutting is recommended.
1. Offset: .250
2. Speed: 10 cm/s
3. Blade: 45 degree (Juliet) 60 degree (Romeo)
4. Cut Force: 30-35 (Juliet) 25-30 (Romeo)
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. test cutting is recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 23
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 4
Speed: 8
Force: 11
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: More Blade: Fine-Point Blade
