• 315–330°F 
• 15 seconds
• Peel warm or cold
• Medium, even pressure
• Cut in reverse
• Cotton, linen, wool, lycra, spandex, polyester blends. NO nylon / NO mesh
• Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener.

Additional Instructions

For dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Frosty Clear - Dye Sub Instructions

320–380°F | 15 seconds | Peel cold then cover with Teflon sheet and repress for 5 seconds | Medium, even pressure

Cut Settings

Graphtec CE6000:

1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16 HTW uses a 45 Degree Blade

Silhouette Cameo:
Material: Heat Transfer, Smooth | Blade: 3 | Speed: 8 | Force: 6

Cricut®:
Set Material: Iron-On | Pressure: Default | Blade: Fine-Point Blade (Standard)

• ThermoFlex Turbo PDF Instructions