ThermoFlex Glossy

ThermoFlex Glossy is great for those special designs that want to stand out and look great!

• Glossy finish
• Durable 
• Will not layer
• Will not adhere to nylon
• Approximately 100 Microns Thick
• Due to the manufacturing process, material may vary in width by 1/8-1/4"
• Accessories
• Click here for ThermoFlex standard colors

• 330° F
• 15 seconds
• Peel warm or peel cold
• Medium, firm pressure
• Cut in reverse
• Cotton, linen, wool, lycra, polyester blends & spandex
• Wait 24 hours before first wash. Machine wash warm, tumble dry normal

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

 Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

Write a Review