ThermoFlex & Turbo Neons Heat Transfer Vinyl - 12", 15", and 20"
ThermoFlex Neons and Turbo Neons are premium, polyurethane-based heat transfer vinyls designed to make your designs pop with vibrant, eye-catching colors. Both share the same professional qualities — soft matte finish, easy weeding, flexibility that moves with the fabric, and long-lasting durability. No matter which you choose, your creations will stand out with a bright, professional look.
The difference? Turbo Neons presses faster at lower temperatures, perfect for delicate fabrics or high-volume projects. Standard ThermoFlex Neons deliver the classic neon look with trusted press settings. Both cut beautifully on Cricut, Silhouette, Graphtec, and other cutters for precise, professional results.
Why Choose ThermoFlex or Turbo Neons?
- Eye-catching neon colors for maximum impact
- Available in multiple widths: 12", 15", and 20"
- White adhesive backing suitable for dark garments
- Perfect for single-layer designs — does not layer
- Soft matte finish with a flexible hand
- Strong adhesive & easy weeding — pressure-sensitive carrier helps with small details
- Compatible with laser cutters for precision cutting
- Approximately 100 microns thick for consistent application
- Slight width variations (¼–½") may occur due to manufacturing
Fabric Compatibility
- Cotton, polyester, cotton/poly blends, spandex, Lycra®
- Turbo Neons only: Also safe for nylon and some coated fabrics
- Not recommended: mesh or treated surfaces unless prepped as instructed
-
12" Pricing:
3 foot roll = $8.50
5 yd roll = $32.99
10 yd roll = $61.99
30 yd roll = $174.99
15" Pricing:
3 foot roll = $8.50
5 yd roll = $35.99
10 yd roll = $68.99
30 yd roll = $199.99
12" x 12" Sheet = $3.50
20" Pricing:
5 yd roll = $46.99
10 yd roll = $88.99
30 yd roll = $264.99
- Plus: 330° F Turbo: 265° F-300° F
- Plus: 15 seconds Turbo: 5 seconds
- Plus: Peel warm or cold. Turbo: Warm
- Medium/firm even pressure
- Cut in reverse Cotton, linen, wool, lycra, spandex, polyester blends.
- NO nylon(For Plus)/ NO mesh
- Wash warm, tumble dry on normal setting
Additional Instructions
Application instructions
For dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Frosty Clear - Dye Sub Instructions
320-380°F
15 seconds
Peel cold then cover with Teflon sheet and repress for 5 seconds
Medium, even pressure
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
- Offset: 0
- Speed: 25 cm/s
- Acceleration: 4
- Cut Force: 16
HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
ThermoFlex Turbo PDF Instructions
