SISER44 Orange Aztec HTV for Shirts and Garments
All your favorite seasonal patterns now printed on Siser heat transfer
vinyl! With our Siser HTV Patterns you will get easy cutting and weeding
with a thin and soft feel!
Product Details
- 11" printed workable space
-
.4-.5" white space on either side of the pattern, please see image for
clarification. This does not effect your print. Each
pattern is printed 11" x 36" or 11" x 180"
- Static Liner
- 80 Microns/3.1 Mils thick
- Semi-gloss finish
- Composition: PU
-
This product requires a heat transfer mask:
Siser TTD High Tack Mask
- Colors are subject to change without notice.
Production Timeline
- All patterns are printed on demand.
-
May delay your order 1-3 business days; depending on the time the order
is placed and the quantity.
-
This is a Fargo only item, your entire order will ship from Fargo.
Transit times may vary. Please see our shipping policies for further
details.
How to use our printed patterns
- Load the the vinyl pattern side UP in your cutter
- Cut your design right reading, do NOT mirror
- Weed away excess
-
Apply your heat transfer mask of choice
-
Please note a heat transfer mask is required for this material to
work properly
- Squeegee your mask onto your design, smooth it out
-
Flip your design over so the pattern is not on the table and the liner
is facing up
- Remove the liner from the material.
- 300°F
- 15 seconds
- Peel mask warm
- Medium, even pressure
- Print and cut material right reading
-
100% cotton, 100% uncoated polyester, poly/cotton blends
-
Machine wash warm, dry normal, wait 24 hours before first wash
Additional Instructions
Additional Instructions
Cut your design right reading
Weed away excess material
Press your design at one of the temps and times listed above
Peel warm
CUT SETTINGS
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade
is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is
Recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 1
3. Speed at 5, Pressure at 6
4. Double Cut/Cut on Mat
