Contact Us

Siser Neon Glitter 12" Sheets

Write a Review

Siser Neon Glitter 12" Sheets

Add some NEON bling to your designs to stand out from the rest with Siser Neon Glitter! When using Siser Neon Glitter, you will get the most sparkle without all the shedding of glitter flakes on your hands! This is great for kids of all ages that love the shimmer look and it's safe to apply on their clothing too since it's CPSIA Certified. 

  • 11.8" x 12"
  • Textured feel
  • Works as embroidery applique
  • Glitter can only be layered as top layer or inlay
  • Laser friendly
  • Approximately 325 Microns/12.8 Mils thick
  • Note: Material may peel back from the liner.
  • If this happens, we recommend smoothing it down prior to cutting
  • Material may vary in width by a 1/2" – 1" 
  • Not made for fine-cut designs
  • Composition: PU
  • Siser Neon Glitter 12"
  • Siser Neon Glitter 20"
  • Accessories 


11.8" x 12" pricing :
1-4 sheets = $5.49/per sheet
5-14 sheets = $5.00/per sheet
15-74 sheets = $4.20/per sheet
75-149 sheets = $4.00/per sheet
150+ sheets = $3.80/per sheet
Transluscent Pink and Orange Pricing :12x12 sheet = $2.00

  • 330°F
  • 15 seconds
  • Peel hot or cold
  • Medium to firm pressure
  • Cut mirror image
  • Cotton, polyester, fabric blends, spandex, lycra, wool, linen
  • Wash warm, tumble dry normal

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. test cutting is recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 23

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 4

Speed: 8

Force: 11

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: More Blade: Fine-Point Blade

  • This product has options that are DROPSHIP ONLY and, if selected, this material will be sent via ground shipping from the manufacturer and will ship separately from your order.

Customers Also Bought