Siser EasyPSV Printable Gloss
Siser EasyPSV Printable Gloss is just like EasyPSV products but now formulated for Wide-Format Solvent, EcoSolvent, and Latex printers!
- Is NOT compatible with Desktop printers, Inkjet, Laser, Water-based Eco solvent inks, or Sublimation printers
- For use on hard surfaces
- Glossy finish
- Permanent tack
- 3 year rated durability
- Should not be used on walls or for temporary use
- Compatible with Solvent, EcoSolvent, Latex, and Mimaki UV Printers
- To be used with EasyPSV Application Tape
- 100 microns
- Calendared PVC composition
- Heater/Dry Temp: 113°F/45°C
- Dry time: None (standard prints) or 1 hour (heavy saturation prints)
- If you use this product we will not be able to take on a return
- Cut right reading
- Adheres to hard surfaces
Additional Instructions
- Cut image in right reading
- Weed material
- Squeegee transfer mask over image
- Remove the white backing (images will stick to the transfer mask)
- Squeegee images onto surface
- Remove transfer mask
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 1
Speed: 3
Force: 4
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Vinyl
Pressure: Default
Blade: Fine-Point Blade (Standard)
