- See below for temperature on different garments
- See below for time on different garments
- Peel Warm
- Medium, even pressure
- Cut and print your design right reading
- Cotton, Polyester, Uncoated Nylon, Mixtures of polyester/cotton and polyester/acrylic
- Wash inside out. Tumble dry.
Additional Instructions
Temp Time
265°F : 5 seconds
300°F: 4 seconds
320°F: 3 seconds
For NYLON
Press at 300°F.
Preheat garment for 5 seconds. Press for 5 seconds then remove liner and cover transfer with a teflon sheet and press for another 10 seconds.
Additional Instructions
- Print and cut your design right reading
- Remove from printer and wait for inks to completely dry
- Weed away excess material
- Press your design at one of the temps and times listed above
- Peel warm
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
