CLOSEOUT Laser Dark Transfer Paper
All sales are final on this closeout product; no returns or exchanges will be accepted
WALAPaper Laser Dark is a heat transfer paper that is made for laser printers which allows for easy at-home printing. It takes just minutes to design, print and create professional looking custom designs on garments.
- Doesn't work with White Toner Laser Printers
- Use on dark colored garments
- Made for a full range of laser printers
- Fast drying
- Easy to peel hot or cold
- Permanent fabric transfer
- Soft to the touch
- Is flexible-has Fiberflex technology
8.5 x 11
20 Sheet Pack = $9.71
100 Sheet Pack = $48.57
11 x 17
20 Sheet Pack = $19.43
100 Sheet Pack = $120.00 per pack
- 325°F for 100%-50% cotton blends or 275°F for fabrics less than 50% cotton
- 20 seconds
- Cold
- Medium even pressure
- Print and cut right reading
- 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend
- Wash inside out in cold water. Use mild detergent. Do not use bleach. Dry on low.
Additional Instructions
STEP BY STEP INSTRUCTIONS:
- Bring paper to room temperature before printing
- Load transfer sheets into your printer so that the image is printed on the unlined (non-glossy) side.
- Using your computer, select or design images to be transferred. DO NOT mirror or flip the image before printing.
- Print image/design on paper using the following recommended print settings
- Use scissors to cut around the transfer artwork to remove excess
- Preheat heat press to 325°F for 100%-50% cotton blends or 275°F for fabrics less than 50% cotton
- Press fabric for 3-5 seconds to release moisture and remove wrinkles
- Peel liner from back of transfer
- Place printed transfer onto the fabric with the printed side up and cover completely with parchment paper
- Set to medium pressure
- Press for 20 seconds
- Remove parchment paper from transfer using a smooth, even motion
STEP BY STEP INSTRUCTIONS:
- Bring paper to room temperature before printing
- Load transfer sheets into your printer so that the image is printed on the non-glossy (unlined) side.
- Using your computer, select or design images to be transferred. Mirror or flip the image before printing.
- Print image/design on paper using the following recommended print settings
HP
Media: Extra Heavy
OKI
Media: Heavy
RICOH
Media: Thick
CUTTING INSTRUCTIONS:
Use scissors to trim image/design from transfer sheet to remove excess area.
PRESSING INSTRUCTIONS:
- Preheat press to 325 degrees
- Press fabric for 3-5 seconds to release moisture and remove wrinkles
- Place printed image face down on the garment (the lined side will be facing up)
- Set at medium pressure for best results
- Press for 20 seconds
- HOT peel. Peel immediately for best results. Remove the backing paper from the transfer using a smooth, even motion while the transfer is still HOT.
WASHING INSTRUCTIONS:
- Turn the garment inside out
- Wash in COLD water
- Use a mild detergent for best results
- Do not use bleach or bleach alternative detergents
- Remove the garment promptly from the washer (colors may bleed if left in the washer)
- Dry on LOW temperature
ADDITIONAL NOTES:
- Test results demonstrate better color retention after washing using hot peel method
- When transferring several images to the same fabric, wait until all images are transferred before peeling the backing paper to prevent the heat from affecting already transferred images
- Store unused transfer papers in a resealable polybag in a flat, cool, dry area
